代铬刷镀层的耐腐蚀机理的考察

对新型的代铬刷镀层Ni-Fe-W-P-S进行了耐腐蚀性能机理的分析研究。用扫描电镜(SEM)、透射电镜(TEM)、扫描隧道显微镜(STM)、X射线衍射及电子能谱(XPS)等的分析表明，基体组织为非品结构是代铬刷镀层优异耐腐蚀性的主要原因.     

Prediction of retention indexes. I. Structure-retention index relationship on apolar columns

A simple method is reported for predicting the retention index (RI) of a chemical compound from the number of carbon and carbon equivalent atoms in the molecule, the RI increment for atom addition and the group retention factors (GRFs) for substituents and functional groups. Atoms other than carbon such as oxygen, nitrogen, sulfur, chlorine, bromine and iodine are assigned carbon atom equivalency of approximately 1, 1, 2, 2, 3 and 4, respectively and are counted for their contribution towards RI prediction. The GRFs of substituents and functional groups are derived from the RIs of reference compounds and series of homologues. Ring structures, ring fusion, ring connection, iso- and neo-carbons, chain branching and unsaturation are also assigned GRFs. The predicted RIs of a number of alicyclic, aliphatic and aromatic hydrocarbons, primary, secondary and tertiary alcohols, phenols, aliphatic amines, aromatic amines, heterocyclics, carboxylic acids, acid esters, aldehydes, ketones, and halogenated compounds, are found to be within +/- 3% of the observed values. The structure-retention index relationship thus developed is extremely useful in the tentative identification of radioactive side products formed in tritium labeling by radiation-induced methods.     

毛细管电泳法快速测定保健食品中免疫球蛋白G

建立了毛细管电泳法快速测定保健食品中免疫球蛋白G(IgG)含量的方法,成功测定了不同剂型(片剂、粉剂及胶囊)牛初乳保健品中IgG的含量。以37 cm×50μm(i.d.)未涂敷熔融石英毛细管为色谱分离柱,50 mmol/L四硼酸钾 65 g/L聚乙二醇20 000(1 mol/L氢氧化铯调pH 10.0)为运行缓冲液,于214 nm波长处检测。详细研究了影响实际样品中IgG分离及准确定量的关键因素,如添加剂的种类、浓度;运行及样品缓冲液的浓度及pH等。采用峰面积外标法定量。方法的精密度为2.1%(n=7);检出限为6.25 mg/L(S/N=3);线性范围为50~2000 mg/L;400 mg/L IgG迁移时间的相对标准偏差(RSD)为0.14%;峰面积的RSD为2.9%(n=7)。6 m in内即可实现保健食品中IgG的分离与测定,结果与产品标示值基本吻合。     

纳米TiO2膜用于光催化氧化测定化学需氧量的研究

A photocatalytic oxidation method for determination of chemical oxygen demand （COD） using nano-TiO2 film, based on the use of a nano-TiO2-Ce（SO4）2 system and electrochemical detection, was proposed. The technique was originated from the direct determination of the Ce（Ⅲ） concentration change resulting from photocatalytic oxidation of organic compounds. Ce（Ⅲ）, which was produced by photocatalytic reduction of Ce（SO4）2, could be measured at a multi-walled carbon nanotubes （MWNT） chemically modified electrode （CME）. The COD values by this method were calculated from the differential pulse voltammetry （DPV） current of Ce（Ⅲ） at the CME. Under the optimal operation conditions, the detection limit of 0.5 mg·L^-1 COD with the linear range of 1-600 mg·L^-1 was achieved. This method was also applied to determination of various COD of ground water and wastewater samples. The resuits were in good agreement with those from the conventional COD methods, i.e., permanganate and dichromate ones.     

Fluorinated poly(arylene ether ketone)s bearing pentafluorostyrene moieties prepared by a modified polycondensation

The polycondensation of decafluorobenzophenone with hexafluorobisphenol A was modified by the addition of a molecular sieve dehydrating apparatus to the refluxing reaction system. This modification promoted the polymerization and enabled the reactions to be conducted in milder conditions and completed in a shorter time, thereby depressing side reactions such as branching and crosslinking. The resulting fluorinated poly(arylene ether ketone)s (FPAEK) were free of gel particles and possessed the designed molecular weights. This modified procedure was also suitable for introducing crosslinkable pentafluorostyrene (FSt) moieties into the polymers at the chain ends and/or inside the chain with the vinyl group of FSt being pendant. The resulting FSt containing fluorinated poly(arylene ether ketone)s (FPAEK‐FSt) can then be thermally crosslinked at 100 °C in the presence of 1% benzoyl peroxide (BPO) or at 250 °C without any initiator. The glass‐transition temperatures (T_g's) of FPAEK increased with increasing molecular weight and leveled off at about 147 °C for the polymer with a number‐average molecular weight of 18,600 Da, whereas the values were not apparently affected by the addition of FSt units. However, crosslinking of the FPAEK‐FSt resulted in an approximate 30 °C increase of the T_g. Spin‐coating FPAEK‐FSt onto silicon wafers followed by crosslinking gave films with excellent thermal stability, physical strength, and adhesion to the substrate as well as good reproducibility in terms of film preparation and optical properties. The refractive index and birefringence of the films measured at a wavelength of 1.55 μm were 1.502 and 2.5 × 10^?3, respectively. © 2002 Government of Canada. Exclusive worldwide publication rights in the article have been transferred to Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4205–4216, 2002     

铕掺杂BaPbO3的EXAFS研究

采用扩展Ｘ射线吸收精细结构方法，研究了铕掺杂ＢａＰｂＯ３多晶粉末中Ｅｕ，Ｐｂ两种原子的近邻结构。Ｅｕ的掺杂，导致八面体中金属Ｐｇ，Ｅｕ的配位数降低。     

Separation and identification of the phthalic anhydride derivatives of Liqusticum Chuanxiong Hort by GC-MS, TLC, HPLC-DAD, and HPLC-MS

A simple, sensitive, and rapid method using gas chromatography (GC)-mass spectrometry (MS) is developed for the simultaneous separation and identification of the active ingredients of Liqusticum Chuanxiong Hort (Chuanxiong). Ten phthalic anhydride derivatives (PADs) are identified in Chuanxiong as 3-butylphthalide, 3-butylidenephthalide, 3-butylidene-4-hydroxyphthalide, senkyunolide A, neocnidilide, Z-ligustilide, E-ligustilide, senkyunolide F, senkyunolide-H, and senkyunolide-I. The existence of ferulic acid and vanillin in Chuanxiong extract is also demonstrated. Further identification of these compounds is performed by thin-layer chromatography, high-performance liquid chromatography (HPLC), and HPLC-MS analysis. This is the first report of the separation and determination of the PADs in Chuanxiong by GC-MS.     

缓慢炭化部分氧化对制备煤质活性炭的影响

研究了炭化升温速度、炭化低温区引入空气部分氧化对活性炭制备过程中炭化阶段、炭化物结构、活性炭性能等的影响。结果表明，炭化时低温部分氧化可提高炭化物得率，使炭化物微晶的ｄ００２值升高和Ｌｃ值减小；而较慢的炭化升温速度有利于制备优质活性炭。缓慢炭化、部分氧化可以在一定程度上控制炭化路径，使炭化向生成取向性差、难石墨化、各向同性、呒定形炭多的炭化物的方向进行；并讨论了它们控制炭化的作用机理。以此为指导，     

Recycling Chiral Organocatalyst （4S）-Phenoxy-（S）-proline for Direct Asymmetric Aldol Reaction in Ionic Liquid （bmim）PF6

Room temperature ionic liquid (bmim)PF6 was evaluated for recycling an organocatalyst (4S)-phenoxy-(S)-proline for direct asymmetric aldol reactions. The desired aldol products were obtained with good yields up to 93.2% and enantioselectivities up to 88.5%, and isolation of the products by simple extraction allowed recycling the ionic liquid containing the immobilized catalyst in subsequent reactions without significant decrease of yields and enantioselectivities.     

不同环大小分子筛对钼基分子筛催化剂上甲烷无氧芳构化反应的影响

 钼基分子筛催化剂，由于不同分子筛的孔道大小及孔道形状不同\r\n，对甲烷芳构化反应表现出不同的催化性能．具有8元环孔道结构的小\r\n孔ERS－7分子筛没有催化活性，说明甲烷的芳构化反应离不开分子筛孔\r\n道的择形作用，较小的孔道中不能生成苯等芳烃．具有10元环孔道结构\r\n的ZSM－5，ZSM－11和ZRP－1三种分子筛具有较好的催化性能，但由于\r\n其孔道大小及孔道形状的差别在催化行为上表现出一定的差异．具有1\r\n0元环和12元环孔道结构的MCM－22分子筛，尤其对苯等轻芳烃而言，催\r\n化性能最佳．具有12元环孔道结构的JQX－1以及中孔分子筛SBA－15，\r\n虽然具有一定的催化性能，但活性较低．研究结果表明，孔道大小与苯\r\n分子动态直径相近或孔道稍大的分子筛是催化甲烷芳构化反应的良好载\r\n体，孔道过大或过小都不利于苯和萘等芳烃的生成．